Figure 3. MemoCam Unit – Rear View
Placing the MemoCam
®
Unit
Begin by selecting a mounting location on the
wall. Choose a location most likely to intercept
an intruder. Make sure that the MemoCam
power cord can reach a nearby power
receptacle. If necessary, use an extension cord.
The MemoCam performs best in steady light
and stable temperature, and is most sensitive
in detecting sideways motion.
Avoid the following locations:
Facing direct sunlight or light sources
Facing areas subject to rapid temperature
changes
Areas with air ducts or substantial air flows
Facing areas with high light contrast
To mount the MemoCam:
1. Loosen the two pieces of the mounting
bracket provided with the unit (refer to
Figure 4) without separating them. The two
sections of the bracket should swing freely.
¡
7
