6.2. Using the MODE button
Selection of an integrated charge mode and other general settings can be made using the physical MODE button on the charger.
To select an integrated charge mode using the MODE button:
1. Briefly press the MODE button to cycle through the available charge mode options; the LED beside the currently selected
charge mode will be illuminated.
2. If required, activate recondition mode by continuing to cycle through the available options; when enabled the RECONDITION
LED will be illuminated in addition to the selected charge mode LED.
3. If required, activate low current mode (reduced charge current) by pressing and holding the MODE button for 3 seconds;
when enabled the LOW LED will blink.
To deactivate low current mode, also press and hold the MODE button for 3 seconds.
Phoenix Smart IP43 Charger
Page 22
Setup
