Victoria VITTORIA 8, Instruction Manual

Page: 10 / 24

Victoria-05 Ltd.
10
10.2.1.Main user control panel.
To visualize every function from the display it is necessary to touch the respective icon. The blue arrow in the sub menu is for
returning to the previous screen. By pressing
SAVE all corrections are saved. The left and right arrows are for decreasing and
increasing the value of the respective parameter.
Display symbol Description
00/00/00
Date display
day/month/year
00 : 00
Hour display
Hour : Minutes
Indoor temperature
The number in the rectangle shows the current room
temperature.
The number in the circle indicates the desired room
temperature.
We need to touch the icon with the number for room
temperature. An additional page opens, where we can set the
desired temperature (min.2oC-max.45oC).
The desired temperature is entered using the left and right arrows. The value is saved using the
Save button. When you touch the button, a green bar appears at the bottom of the display. Wait
until it is full to execute the command. Hiding the green bar means that the value is stored
correctly. The return icon is removed during the memorization process. It appears after the
process is completed.
If there is no connection to the controller for more than 6 seconds, the value is not saved!
Manual feed Pressing the icon would start the screw conveyor for 10 seconds! When this time is over, the
screw conveyor stops again and waits until a new icon click is done.
The icon would only be visible in Ready Mode, whereas, respectively, on starting of the fireplace
it will disappear!
Main menu and
service settings When the icon is touched, a new page with the main menu is opened.
Activated timer
Red colour: the timer is activated and waiting
for the set time to stop the stove.
Activated timer
The green one shows that the timer has been
set active and is waiting for the fireplace to
start
10.2.2.Types of modes of the control unit.
READY MODE
BURNING
START MODE MODULATION
FUEL MODE CLEANING
IGNITION MODE ECO MODE