Vicovation VICO-MF3, Installation Manual, Page: 8 / 27

English
07
Start Operating the Device
1.
2.
3.
4.
5.
6.
7.
Insert the memory card into
microSD Card Slot following
the direction shown in the
diagram. Push to the end until
you hear a light click.
Vico-MF3 supports 1440p
recording, and a class 10
memory card must be used.
After connecting to a power source, the device will boot up and enter
recording mode. During the initial 3 seconds, recording cannot be
paused due to the system check. However, you may enter “Menu”
during this time.
Please adjust “Time/date” settings and format the memory card from
the settings menu first before operating the device for the first time.
To remove your inserted memory card, please make sure the
recording has been stopped and the power has been turned off. Do
not try to eject the memory card while the camera is recording as this
may result in the file becoming damaged.
Vico-MF3 is equipped with standard microSD card slot. A Class 10
microSD memory card (SDHC/SDXC) is required.
Card reader mode can be turned on Vico-MF3 by connecting the
USB port on the device with a computer. To go back to operating the
device normally, simply connect the device back to the power source
with the power cable.
Recording Storage Capacity
8GB
16GB
32GB
64GB
1080p 60fps
30 mins
79 mins
177 mins
372 mins
1080p 30fps
40 mins
105 mins
235 mins
495 mins
1296p 30fps
30 mins
79 mins
177 mins
372 mins
1440p 30fps
20 mins
62 mins
146 mins
314 mins
1080p 45fps
73 mins
170 mins
365 mins
756 mins
128GB 762 mins 1016 mins 762 mins 649 mins 1536 mins
Micro SD