VicFix Frame 3x1 (Vertical Assembly)
INSTALLATION PROCEDURES
Hammer the two nails per each triangular part. Then, fit
two screws (not included) onto your wall and use these
triangular parts to hold your frame in place. Make sure
the two screws are correctly levelled on your wall.
Step 3 (Vertical Assembly)
Push two spike parts on three di
ff
erent wooden 40cm pieces.
Step 1 (Vertical Assembly)
Push your Vicoustic acoustic panels into the
spiked pieces at a 45º angle for the best fit.
Step 2 (Vertical Assembly)
Fit in all screws as shown on the pictures.
Step 4 (Vertical Assembly)
