Page 8 of 12
August 2015
Vantage
Quick Start
Guide
Set up your Vicon Vantage system
Start the software
1
On your Windows desktop, double-click
the shortcut for the required Vicon
software.
2
If this is the first time you have used your
Vicon application software on this PC, a
dialog box may be displayed, enabling you
to specify the license server.
3
In the
System Resources
pane (in Blade,
the
Selection
editor), make sure all of the
cameras in your system are listed.
4
Ensure that at the top left of the screen
the system is shown as live and connected.
Position the cameras
1
In the
System Resources
pane (in Blade,
the
Selection
editor), select a camera.
2
Change the View pane to
Camera
view (or
in Blade, click the
Camera Layout
button
and ensure you are looking at a
Capture
view).
3
Aim the camera so that it points where
required, usually the center of the capture
volume.
4
Repeat the process for each camera.
The diagram (right) shows typical camera
coverage of the capture volume.
Summary of Contents for Vantage V16
Page 1: ...Quick Start Guide...
