Vicon RV 4116, Operation And Maintenance Manual

Page: 70 / 192

▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬ General information about the machine
4
83-004-0.
fm
ID
M
English
- 64 -
Part 2
LUBRICANT TABLE
51
Use oils and lubricants whose features are the same as the ones that are
specified in the chart.
After 10 hours
(since the first
operation)
Auger transmission (left
side) Check and, if necessary, adjust the
tensioning of the chain.
see "Pick-up unit § How to
adjust the pick-up
transmission chain"
Every 20 hours Shock absorbers Check pick-up unit balancing
see "Pick-up unit § How to
balance the pick-up unit "
Every 50 hours
Safety bolt
Check the efficiency and, if
necessary, replace it see "Pick-up unit § "How to
replace the safety bolt"
Hydraulic system
Check that all pick-up unit driving
components are undamaged and, if
necessary, have them replaced.
Contact the Technical
Assistance Centre that is
authorised by the
manufacturer
Auger transmission (left
side) Check and, if necessary, adjust the
tensioning of the chain.
see "Pick-up unit § How to
adjust the pick-up
transmission chain"
Every 100 hours Reel
Check the efficiency of the bearings
and, if necessary, have them
replaced.
Contact the Technical
Assistance Centre that is
authorised by the
manufacturer
Every 12
months
Reel
Check the efficiency of the cams
and, if necessary, have them
replaced.
Contact the Technical
Assistance Centre that is
authorised by the
manufacturer
Table 6: Intervals of periodic maintenance
Frequency Component Type of intervention Reference
Table 7: Features of the lubricants
Suggested lubricants Parts to lubricate Quantity
oil AGIP F1 - EP 90 (SAE 80W90) Reduction gear 2,3 l
oil AGIP F1 - ROTRA THT
Hydraulic cylinder of the tightener
unit
5 l
oil SAE 20W - ISO VG 46 - ISO VG
68
Automatic lubrication system 2 l
grease AGIP LF1 Greasers -
Driving rollers -