Vicon RV 4116, Operation And Maintenance Manual

Page: 63 / 192

4
83-004-0.
fm
ID
M
English
- 57 -
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬ General information about the machine
Part 2
HOW TO ADJUST TRANSMISSION CHAINS
45
Follow the instructions.
1. Make sure tractor PTO is dis-
engaged.
2. Stop the engine, apply the
parking brake and disengage
the ignition key.
3. Open the cover (A) .
4. To evaluate if the chains are
tightened in a correct way, the
length of the spring
(D) must
equal 150 mm.
5. Adjust the length of the spring
(and, as a consequence, the
tensioning of the chain
(C) ) by
means of the nuts (B) and the
locknuts.
6. Close the cover (A) .
HOW TO ADJUST CENTRALISED LUBRICATION
46
Follow the instructions.
1. Make sure tractor PTO is dis-
engaged.
2. Stop the engine, apply the
parking brake and disengage
the ignition key.
3. Open the cover (A) .
4. Unscrew the plug (B) .
5. Adjust the quantity of oil.
- TIGHTEN the screws (C) to
increase the quantity.
- LOOSEN the screws (C) to
diminish the quantity.
6. Screw again the plug (B) .
7. Close the cover (A) .
150 mm
A
B
D
C
ID
M-21722
103100.
pdf
B
ID
M
-48300101
100.
pdf
A
C
B