Vicon RV 4116, Operation And Maintenance Manual

Page: 39 / 192

4
83-004-0.
fm
ID
M
English
- 33 -
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬ General information about the machine
Part 2
SAFETY DEVICES
27
–
Cardan shaft (A) : the shaft
that is supplied with the ma-
chine is constant-velocity type
and can be equipped either
with a safety bolt or with a
pawl-type torque limiter.
With cardan shaft equipped
with pawl-type torque limiter, in
case of clogging and/or flood-
ing of the machine, the move-
ment will disconnect.
With cardan shaft equipped
with safety bolt, in case of clog-
ging and/or flooding of the ma-
chine, the bolt will be shorn to
interrupt the movement.
–
Cock (B) : it is used to lock the
tail gate in "open" position, so
that the maintenance works in-
side the baling chamber can be
carried out in safe conditions.
–
Fixed guard (C) : it prevents
the access to the moving devic-
es of the machine. It can be
opened only by means of an in-
tentional action and with the aid of a tool.
–
Wheel chocks (D) : they are used to prevent accidental displace-
ments when the machine is parked and uncoupled from the tractor.
–
Support (E) : it supports the cardan shaft and prevents its protections
from breaking when it is disengaged from the tractor PTO.
–
Support leg (F) : it keeps the drawbar of the machine in position
when the machine is uncoupled from the tractor, and than makes its
coupling easier.
–
Cock (G) : it is used to lock the pick-up unit in "lifted" position, so that
the transfer of the machine (during road use) can be carried out in
safe conditions.
–
Unflooding tool (H) : it is used to remove the clogging and/or the
flooding in the area of the pick-up unit and/or of the feeding unit.
ID
M
-48300100800.
pdf
A
E
F
D
C
G
H
B