Vicon RV 4116, Operation And Maintenance Manual

Page: 36 / 192

▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬ General information about the machine
4
83-004-0.
fm
ID
M
English
- 30 -
Part 2
ALLOWABLE SLOPES
24
The image shows the maximum
permissible slope in hard grounds,
free from hollows and obstacles,
with the machine in running order.
Danger
Warning
Danger of overturning: do not
use the machine in soils whose
slope exceeds the allowed limit
or in the presence of other haz-
ards (rises, hollows, etc.), which
could limit the stability of the
machine.
In case of steep soils, adapt the
speed of the machine according
to the slope and the stability of
the soil.
EQUIPMENT
25
The following equipment is supplied with the machine.
–
Tool for product clogging removal (A) : it is a safety device that is
used to remove the blockages and/or clogging in the zone of the pick-
up unit and/or of the feeding unit (SIMPLE FEEDER).
–
Tool for product clogging removal (A1) : it is a safety device that is
used to remove the blockages and/or clogging in the zone of the pick-
up unit and/or of the feeding unit (ROTOR).
–
Pivot (B) : used for facilitating the mounting of the safety shear pin of
the pick-up unit.
–
Safety bolt of the pick-up unit (C) : in case of product clogging, it
gets sheared to prevent damages to assemblies or parts of the ma-
chine (Only for narrow or wide pick-up unit).
–
"Double feeder" feeding unit safety bolt (D) : in case of flooding, it
must be shorn to prevent damages to units or parts of the machine.
–
Cardan shaft safety bolt (E) : in case of flooding, it must be shorn to
prevent damages to the cardan shaft or parts of the machine.
Replace the shorn "safety bolts" ONLY with original spare
parts that comply with the provisions.
ID
M-
21720300700.
tif