Vicon RV 4116, Operation And Maintenance Manual

Page: 27 / 192

4
83-004-0.
fm
ID
M
English
- 21 -
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬ General information about the machine
Part 2
–
Danger of running into people, animals or things during reverse mo-
tion, opening/closing of the tail gate and bale unloading caused by a
reduced visibility from the driver's seat of the area behind the ma-
chine.
–
Danger of contact between the upper limbs or parts of the body and
parts of the machine during those maintenance operations in which
it is necessary to perform some checks with machine devices being
moving.
–
Danger of fire if machine maintenance and check procedures are not
performed correctly, especially if there is a bale (partial or complete)
inside the baling chamber.
–
Danger of catching into the cardan shaft if the protective devices are
damaged or are not installed in a correct way.
AREAS OF DANGER
18
The figure illustrates the danger
zones where no-one should be
when the machine is in use. It is the
operator’s duty to keep such zones
out of bounds; if necessary, (s)he
should turn the engine off and clear
out the danger zone.
NIGHT WORK
19
The machine can be used during night hours, too. The work in such con-
ditions implies an increased number of risks. In order to avoid endanger-
ing the health and safety of people, all lighting devices that are installed
in the tractor and in the machine must be effective and efficient.
If the work area conditions require it, you have to perform a preliminary
inspection in order to identify hazardous areas (steep soils, closeness to
precipices, etc.) and mark them adequately.
Caution
Precaution
All adjustment, maintenance and check operations of the machine
can be performed during night hours only if the safety and lighting
conditions are suitable.
IDM-21720300600.tif