Vicon RV 4116, Operation And Maintenance Manual

Page: 184 / 192

▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬ Electronic control system
4
83-011-0.
fm
ID
M
English
- 18 -
PROGRAMMING THE BALE DENSITY
16
Bale density programming concerns only the machine version equipped
with the variable chamber.
Follow the instructions.
1. Display "Lock screen" screen page.
2. Press the push-button
(A) .
3. Programme all parameters on screen
page.
Set up bale diameters (D1-D2-D3) with a min-
imum difference of 20÷30 cm among the dif-
ferent values.
To activate the "soft core" function, set up
the value "0" in area (P1) (Only for machines
equipped with 0 bar valve).
The values assigned to (P1-P2-P3) represent
the actual pressure of the hydraulic system
for bale density, whose value is shown on
the pressure gauge of the machine during
work.
Important
Value (P1) shall not be higher than (P2).
Value (P2) shall not be higher than (P3).
The machine is ready to be started for production.
ACTIVATION OF BINDERS IN "MANUAL MODE"
17
Activation of twine guide arms
Follow the instructions.
1. Display "Lock screen" screen page.
2. Press the push-button
(A) .
3. Press the push-button (B) .
4. Press buttons (C) to activate the opening
or closing of twine guide arms.
A
P3
P2
P1
D1
D2
D3
B
A
C