V2000/V2100 User Guide
46
5.
Network
5.1
General
This section allows user to set detailed settings related to wired network condition for the camera.
Basic Settings
Figure: Network Basic Settings
HTTP Port: 1025 ~ 65535
This protocol allows for TCP protocol quality without having to open specific ports for streaming. User
using a firewall can utilize this protocol to allow streaming data through it. It is recommended to use
the default port number 80; however, if it is required to change the port number, contact your system
administrator.
Enable LDAP: On/Off
For accessing and maintaining distributed directory information services over an Internet Protocol
network, the Lightweight Directory Access Protocol (LDAP), an open, vendor-neutral, industry standard
application protocol, has a major role in both intranet and internet applications to facilitate information
sharing between devices.
Bonjour: On/Off
Bonjour is a specific protocol introduced by Apple Inc. to make IP devices, including IP cameras,
easily found by software like Safari within local network based on zero configuration.
WS Discovery: On/ Off
WS-Discovery (Web Services Dynamic Discovery) is a mechanism that supports probing a network to
find ONVIF capable devices.
View Current Network Settings: View
Click “View” to see your current network related settings.
