Cleaning and care
83
Cleaning
Cleaning is performed with a high-pressure cleaner, with the excepti-
on of the bearings and piston rods of the hydraulic cylinders and elec-
trical parts.
> After each use, remove any coarse dirt and crops from the imple-
ment.
After cleaning
After cleaning:
> Lubricate all of the bearings.
Care
The implement will be completely ready to be used in the next season
if the following instructions are observed:
> applying a protective layer of oil to all bright work tools. Only use
approved, biodegradable oil: rapeseed oil, for example.
> Repair any paint damage.
> Check safety stickers and replace or add as required.
Summary of Contents for RF 2235
Page 5: ...Inhaltsverzeichnis 5...