Hitching the implement
43
Check the cable routing
Check the cable routing. The cable must shown no signs of abrasion
or sagging. Torn or frayed cables can cause unforeseen movements
on the implement.
Check the following connections between the tractor and the imple-
ment:
•
hydraulic connections,
•
electronic connections and
•
compressed air connections (where applicable)
Connecting the
hydraulic
quick-release
coupling
Connect the hydraulic lines as follows:
> Check that the quick-release couplings are clean.
> Connect the quick-release couplings to the tractor.
> Ensure that the tractor's hydraulic system is not pressurised.
> Connect the blue quick-release coupling for the rotor
uncoupling [+] to a single acting control device.
> Connect the black quick-release coupling for the pick-up equip-
ment and the knives to a single acting control device.
> Connect the yellow quick-release coupling from the rear flap clos-
ure to the double-acting control device.
> Connect the red quick-release coupling from the rear flap opening
to the double-acting control device.
> Connect the quick-release coupling for the hydraulic brake [+] to
the corresponding retainer.
Retainers
Quick-release cou-
Ball valve
Blue
Black
Yellow
Red
Summary of Contents for RF 2235
Page 5: ...Inhaltsverzeichnis 5...
