Eliminating malfunctions
121
Cutterbar blockage
The entire rotor unit is protected by a slip clutch in the cardan shaft.
The slip clutch responds to an overload and transfers no more power.
The clutch responds if there is a loud juddering.
The following steps are possible to clear the blockage in the cutterbar:
•
Swivel out the knives and engage the tractor's PTO shaft.
or
•
Mechanical rotor coupling
or
•
Hydraulic rotor uncoupling [+].
or
•
Empty the bale chamber when the bale is nearly formed.
or
•
Use of the PowerPush system [+]
or
•
Reversal of the rotor's direction of rotation for manual or automatic
removal of the blockage.
Summary of Contents for RF 2235
Page 5: ...Inhaltsverzeichnis 5...
