Vicon KRX-3V5, Installation & Operation Manual, Page: 12 / 39

Chapter 3 - Installation
For first-time installers, these steps provide the most thorough and accurate instructions.
About This Chapter
This chapter details the complete installation of the KRX-3V5 Video Decoder. The following sections provide
information as follows:
Unpacking the KRX-3V5 defines how to remove the unit and accessories from the box.
Required Items for Installation defines items needed for installation.
Unit Components defines all connections on the front panel and their use.
Mounting defines all methods of securing the decoder for permanent use.
Installing the KRX-3V5 describes how to install all necessary peripheral devices directly to the decoder.
Unpacking the Decoder
Carefully open the carton. Remove the accessory kit and the KRX-3V5 from the box and place them on a
large, flat working surface. Open the accessory kit and verify the contents against the list in Table 1-1.
Required Items for Installation
To properly install the decoder there must be simple hand tools available such as a screwdriver, wrenches,
pliers and wire cutters/strippers. To set up the decoder for operation, there must be a PC computer running
the ViconNet (VN) Setup software.
4
•
Chapter 3 - Installation XX184-01-00 KRX-3 Video Decoder