XX185-30 Rev 807 Kollector Lite
Getting to Know ViconNet
•
35
Other Controls
The
Other Controls
area provides functions that affect one selected device at a time and are active only if a
relevant device type is selected. As you select each of these controls, additional controls or information,
relevant to the selected control, are displayed in the
Control Dialog Display
area.
The
Other Controls
area provides the following functions:
Function Description
This function is not active in the Kollector Lite
This
button displays controls in the
Control Dialog Display
area for modifying the color,
brightness and contrast of the displayed video images.
Changing the picture settings is irreversible (meaning that after the settings have been
changed, the previous settings are lost).
NOTE:
The last saved picture settings can only be restored by selecting
Restore
from the
System Settings
window. However, this restores ALL the last backed-up system settings. Refer
to the
Step 3: Controlling the Picture
section in
Chapter 4, Viewing Live Video
, for additional
details.
This button displays controls in the
Control Dialog
Display
area (lower-left panel) for viewing the four analog
outputs made available by the new matrix capable
Kollector Lite rear panel. The matrix feature enables four
digital streams to be converted back to analog from the
Kollector Lite and servers such as analog monitors or TVs
can be used to view the output.
If there are no sites with the relevant hardware, the message:
"No site supporting the switching
matrix exists"
appears.
This
button enables you to display video from a PTZ camera in the
Video Display
area. This
option also automatically displays a driver-specific interface for PTZ-enabled cameras in the
Control Dialog Display
area and on the screen.
Refer to the
Operating a PTZ Camera
section in
Chapter 4, Viewing Live Video
, for additional
details.
This
button displays buttons in the
Control Dialog Display
area by which system functions
can be configured to operate via external device commands.
This button is operational only when an external control panel has been configured on your
system. Refer to the
Configuring a Control Panel
section in
Chapter 3, Configuring the
ViconNet System
, for additional details.
This
button enables you to print out the
Main
window
Video Display
area panel, showing the
frames currently being displayed.
Refer to
Chapter 9, Printing/Exporting Frames and Creating Export Video Files
for additional
details.
