XX185-30 Rev 807 Kollector Lite
Playing Back Recorded Video
•
211
Step 6: Playing Back from a Selected Camera
The ViconNet system enables you to play back recorded video segments in the
Main
window from either:
•
A single currently displayed recorded camera at a time.
-OR-
•
All the currently displayed cameras at the same time.
The ability to play back from one camera at a time or all cameras simultaneously depends on the selection
you made in
Step 5: Displaying Recorded Video Content
, page 209, as follows:
•
If you chose to play back video from all currently displayed recorded devices, then the playback controls
in the
Main
window apply simultaneously to all video display locations that contain recorded data.
•
If you chose to play back video from one recorded device at a time, then you can select the video display
location (indicated by the pink border) for any of the recorded cameras in the
Main
window by clicking its
tree icon. The playback controls in the
Main
window then become active only for the selected device.
During playback, the recorded segment(s) plays from the selected playback start time.
You can also navigate through the recorded segment using standard playback controls such as fast forward
and rewind.
To play back from a selected camera:
1. In
the
Main
window, select the video display location that contains the recorded segment that you want to
play back. The pink border indicates the currently selected video display location.
NOTE:
If you selected the
checkbox in Step 5: Displaying Recorded Video Content,
page 209, you do not need to perform this step.
2. Click
the
Forward
button
. The selected recorded segment plays and the camera source details
change accordingly.
If you selected the
Synchronized Playback
checkbox, all the video segments for the displayed cameras
play simultaneously.
