154
•
Configuring the ViconNet System
XX185-30 Rev 807 Kollector Lite
Configuring Low Bandwidth
You can use this option to configure whether or not museum search information is to be sent over low
bandwidth when the
Low Bandwidth
option is selected (in the
Main
window or in the macro settings
defined in the
Macro Editor
window).
To configure low bandwidth:
1. From the ViconNet
Main
window, click
. The
Setup Site Selection
window is displayed,
showing a list of all currently connected transmitters and Workstations, as shown on page 57.
2. Ensure that you have created the required macros, as described in
Creating Macros
, page 117.
3. Select
your
local
Kollector Lite and click
. The
System Settings
window is displayed, as
shown on page
1
4. Click
to display the
Low Bandwidth Settings
window.
5. Select
either
Send museum search information over low bandwidth
or
Don’t send museum
search information over low bandwidth
, as required.
6. Click
OK
.
