Vicon KollectorLite XG Software Manual Download Page 10 | Manualshive

Page: 10 / 282

Vicon KollectorLite XG Software Manual Download Page 10

2

•

Introducing ViconNet

XX128-34 Rev 607 Kollector Pro Network Digital Video Recorder

What Is the Kollector Lite?

The Kollector Lite is a 16-channel digital video recorder powered by a software platform called ViconNet,
which allows each Kollector Lite recorder to record video from local analog inputs and provide video to other
Kollector Lite recorders and Workstations over the network.

ViconNet also powers each Kollector Lite recorder with the ability to be remotely configured by Kollector Elite
recorders and Workstations on the network. Changes to camera titling, macro programming and scheduling,
as well as frame rate manipulation, are all possible from one or more recorders or workstations on the
system.

The Kollector Lite utilizes two different video compression methods, selectable based on the application’s
requirements:

•

Normal:

Optimized MPEG4. A proprietary compression algorithm developed by Vicon that produces

outstanding video quality and extended recording durations.

•

Full:

JPEG. Standard full-frame compression for use in situations that cannot use motion compensation

compression.

The Kollector Lite can distribute its own collected video to each client, or other server, upon request over a
network. Each client is capable of viewing 16 simultaneous cameras while supporting archiving, system
configuration and the control of pan/tilt/zoom drives. It includes full 16-channel simultaneous record and
playback, an integrated GUI for system configuration/playback/record on a SVGA monitor and support for
NTSC/EIA and PAL/CCIR video cameras. In addition, the Kollector Lite supports Internet connectivity for
remote video transmission.

How Does ViconNet Work?

The idea behind the ViconNet system architecture is relatively simple

⎯

enable full flexibility and minimize

system complexity for the users. The ViconNet system configured on a network can deal with numerous
Workstations. This means that users can use their individual Workstations to view different cameras and
microphones from all ViconNet transmitters (meaning, any device that generates video, such as: the Kollector
Elite, Kollector Pro, Kollector Lite, IP camera, IP server and so on) within the system simultaneously. The data
that can be viewed includes all live data as well as recorded data.

In addition, users can perform recording operations on their individual Workstations within the ViconNet
system according to their requirements. Depending on the assigned authority level, each user can view
everything that is configured in the system at any time.

Connection to transmitters is not limited only to local area networks (LANs), but is also possible for wide area
networks (WANs) and the Internet.

«
...
8
9
10
11
12
...
»

Summary of Contents for KollectorLite XG



























































































































































































































































































Reviews:

No comments

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands