XX128-33-00 Rev 806 Kollector Pro Network Digital Video Recorder
Configuring the ViconNet System
•
89
6. Click
OK
. The
System Settings
window is redisplayed.
NOTE:
If the entered user name and password combination is not defined in the system, an error
message will be displayed. You should try the entries again.
The specified users will now be able to access the system without a login procedure.
NOTE:
The Auto Login (or Auto Login removal) becomes operational only after the next restart of the
application by the Administrator user.
Configuring Storage Database Utilities
The ViconNet system enables you to configure the local storage locations of the Video and Audio database
in your system, depending on your requirements. Each storage location can be made up of a combination
of multiple disks (sections), depending on the number of available disks in the system.
IMPORTANT:
When you add a disk to an existing storage location or enlarge the disk size, all recorded
data is retained. If you reduce the size of an existing storage location, all recorded data is
removed from the system.
When you run the ViconNet application for the first time, the default storage location settings are applicable.
NOTE:
Storage database configuration can ONLY be performed locally.
This section describes how to configure or clear databases, as follows:
•
Configuring Storage Locations
, below
•
Clearing Video and Audio Storage Locations
NOTE:
To avoid damage to databases, if the current session involves recording (since the last reboot), the
Storage Database Utility is disabled. Otherwise, the following message is displayed:
In this case, disable auto recording and macro recording, restart the application and then select the
Storage Database Utilities option again.