94
•
Configuring the ViconNet System
XX128-33-00 Rev 806 Kollector Pro Network Digital Video Recorder
Configuring System Authentication
When the
Check Picture Authentication
feature is active, the ViconNet system automatically verifies that
live or played back ViconNet-produced videos were not tampered with. According to the results of the
verification, one of the following system authentication statuses is displayed on the video:
•
Auth
9
:
Indicates the video segment has been confirmed as authentic.
•
Auth X:
Indicates that the authentication was checked properly but the results were poor and could not
be confirmed as authentic.
To view authentication results for video played on the destination site:
1. From the ViconNet
Main
window, click
. The
Setup Site Selection
window is displayed, as
shown on page 57.
2. Select your Kollector Pro and click
. The
System Settings
window is displayed, as shown on
3. Click
. The
Authentication Setup
window is displayed.
4. Select
the
Check Picture Authentication
checkbox.
This will activate the authentication reporting
mechanism in the video destination.
When you play back a video segment or watch live video, the system reports whether or not the video
is authentic. (When the
Check Picture Authentication
checkbox is deselected, authentication results
are not reported.)
5. Click
to save your selection.