Fault recovery
57
Fault recovery
Malfunctions can often be eliminated quickly and easily. Before calling
Customer Service, refer to the table to check whether the malfunction
is one you can eliminate yourself.
Fault
Causes
Remedy
Rotor leaves harvest across the
whole crop width.
Working depth set too high
→
»Adjusting the working depth«,
→
»Adjust tedder inclination«, page
Fodder is heavily contaminated.
Working depth set too low
Implement not operating cleanly at
high speed.
Rotor tines set too high
Uneven terrain
Speed too fast to process the
amount of fodder
Reduce speed.
Friction coupling responding fre-
quently.
Fodder mass too great or irregular Reduce speed.
Reduce PTO shaft speed.
Working depth set too low
→
»Adjusting the working depth«,
→
»Adjust tedder inclination«, page
Noise production during work
Loose screw connections or worn-
out rotor arms.
Check Rotor arms and screw con-
nections on tines.
Broken tines on the tine anti-loss
device.
Replace the tines.
