Crate packaging
24
Running wheel axles 7
and 8
The running wheel axles of the outer devices are inserted through the
gear box and fastened to the adjusting lever using dowel pins.
Insert the running wheel axle (1) through the rotor disc from below.
Fit 2 sealing rings (2) between the gear box and the frame.
Push the running wheel axle through the sealing rings and up
through the frame.
Place 5 washers (3) on the axle.
Fit the adjusting lever.
Fix the axle with a dowel pin and secure the dowel pin with a lock
pin.
If you have difficulty positioning the sealing rings, you can temporarily
loosen the screws of the gear box slightly, in order to make more room.
Pay attention to the position of the running wheel axles.
»Overview of the running wheel axles«, page 16
7
1
No.
Quantity
Part
1
2
Running wheel axles (1 x left / 1 x right)
2
4
Sealing rings 75 x 35 x 7
3
10
36 x 51 x 3 washers
4
2
Adjusting lever
5
2
Dowel pins
6
2
Lock pins 8 x 36
7
2
Running wheel on rim
4
3
5
6
2
1
