Vicon part number 8009-8244-00-00 Rev 0112
Page 1
INSTALLATION AND OPERATION MANUAL
CE-4US1TPC
4-PorT EThErnET SwiTCh wiTh UTP/
TwiSTEd CoPPEr and Coaxial CablE
ExTEndEr
The CE-4US1TPC is an unmanaged switch that combines four individual Ethernet data
channels over a single standard COAX or UTP cable. Symmetric bandwidth assures
full bandwidth transmission is maintained over the entire operational distance for both
uploads and downloads with virtually zero packet loss. Bandwidth assurance provides
the ability to transmit multiple cameras on single camera runs with no information loss.
Combined with the CE-(X)COAX series or CE-(X)UTP series multi-port extenders up to
64 cameras can be transmitted to a central location on just 16 cables.
The CE-4US1TPC can be powered using standard camera 12 VDC or 24 VAC power
supplies. It also can be powered by PoE eliminating the need for remote site extra cost
power supplies.
Type tested under NEMA-TS2 environmental standards for extended temperature
operation from -40F° to +167F° (-40C° to +75C°). Certified for use with high-
bandwidth megapixel or HD IP cameras and tested to network packet performance
standards along with major manufacturer compatibility testing.
Fixed managed L2 functions include 802.1p Qos, support of 2k MAC addressing,
learning and aging and a non-blocking switch fabric.
Packaged in a rugged aluminum housing, these units are designed for desktop or stand-
alone mounting. See Figure A on page 4 for mounting instructions.
See Figures 1 – 5 for complete installation details.
Important Safety Warning:
Read and keep these directions
Heed all warnings
Follow all instructions
Do not use this apparatus near water
Clean only with a dry cloth
Install in accordance with the
manufacturer’s instructions
This installation should be made by a
qualified service person and should conform
to all local codes
See further safety instructions on page 4
