Crate packaging
44
Fitting the rotors
onto the lifting arms
Fit both rotors onto the lifting arms.
Lower the lift arm into the correct position.
Use a brush to grease the lift arm bearing shaft.
Slide the rotor with the bearing housing into the correct position.
Align the lift arm bearing shaft using shim discs.
Secure the bearing shaft with a ring.
Secure the ring with a dowel pin.
Shim
Bearing housing
Bearing shaft
Shim
Ring
Dowel pin
Lifting arm
Summary of Contents for Andex 844
Page 4: ...Table of contents 4 ...
