Preparations on the field
57
Adjusting the fodder
slow gear
To reduce crop contamination, the front rotor can be slewed to the left
when in the single swath position. In this way the tractor travels over
the crop with the left-hand pair of wheels only.
When in the "Single swath" position, the machine must stand on a
level surface and the deflector bar on the front rotor must be pulled
out.
Adjust the deflector bar as follows:
Loosen the securing lever.
Push in the deflector bar and lock the securing lever in place.
Slew the front rotor as follows:
Select position C on the pilotbox.
Drive slowly forwards and swivel the rotor to the left using the
tractor's hydraulic control device.
Securing pin
Summary of Contents for Andex 714 T Vario
Page 4: ...Table of contents 4 ...