Crate packaging
29
Fitting the PTO
shaft
To connect the PTO shafts, the PTO shaft guard is released as
follows:
Remove the locking screw (c) between the guard tube (b) and the
guard cone (a).
Turn the guard cone (a) and tube (b) until the "noses" of the slide
ring (d) are above the slots in the guard cone (arrows).
Push back the guard cone and tube.
Push the single joint (e) onto the PTO stub shaft. Ensure that it is
securely engaged (f).
Re-secure the PTO shaft guard in the reverse sequence.
Overload clutch
Fit the PTO shaft with overload clutch.
PTO shaft
Overload clutch
