Vibration Research Corporation VibrationVIEW, Manual

Page: 224 / 333

VibrationVIEW Help 211
© 1995-2005 Vibration Research Corporation. All rights reserved.
Level : This box displays the current level number and modifier value the test is running.
Current Time : This box displays the current date and time.
Test Name : This box displays the name of the file that you are running.
See Also:
Classical Shock Accelerometers Toolbar
5.6 Field Data Replicator
Field Data Replicator Control Center
Stop : This button stops the test. You should stop the test before opening a new test. If you stop a test
and want to continue where you left off, click the "Run" button and click the "Yes" button at the dialog
box that asks if you want to continue or start from the beginning.
Run : This button runs the test. Click this button when you are ready to start your test. This button will
be gray when you are not running, yellow when you are starting, light blue if you are starting with a
memorized drive and green when you are running.
Hold Timer : When this button is yellow, the level time counter is paused. This is useful in
combination with the Open Loop button to pause the test in order to adjust the item under test.
Open Loop : When this button is yellow, the output drive spectrum remains fixed (the control loop
updates are disabled). This is useful for disabling the control loop temporarily in order to turn off the
216
205