Vibration Research Corporation VibrationVIEW, Manual, Page: 137 / 333

Menu commands 124
© 1995-2005 Vibration Research Corporation. All rights reserved.
3.8.7 Accelerometers
Accelerometers command ( View menu )
Use this command to show or hide the accelerometers toolbar. A check mark appears next to the
menu item when the status bar is shown.
Shortcuts
Keys: F3
See the following for help on the various status bars:
·
System Check
·
Sine
· Random
· Classical Shock
· Field Data Replicator
3.8.8 Recorder Buttons
Recorder Buttons command ( View menu )
Use this command to show or hide the Recorder Control Center . The data recorder is an optional
package.
3.8.9 Motor Controls
Motor Control command ( View menu )
Use this command to show or hide the Motor Controls toolbar Motor controls are used for the
optional motor simulator package.
3.8.10 Cursor Window
Cursor Window command ( Cursor menu , View Menu )
Use this command to show or hide the Cursor Display box that shows the values for the graph
traces at the current cursor position.
Holding down the <Shift> key while moving the cursor with the mouse snaps the cursor to the nearest
peak.
Holding down the <Ctrl> key while moving the cursor with the mouse snaps the cursor to the nearest
valley.
Shortcuts
Keys: Ctrl+D
3.8.11 Sine Big Display
Sine Big Display command ( View menu )
Use this command to show or hide the Sine Big Display dialog box that displays the frequency and
amplitude parameters in numbers large enough to be seen from a distance. This is useful when
examining a product on the shaker for resonance.
The dialog box also provides a feature for remote control of the sweep direction (using the mouse).
When used with a mouse extension cable, the sine frequency may be controlled from a distance.
215
215
216
216
216
212
281
277
263