Vibration Research Corporation VibrationVIEW, Manual

Page: 132 / 333

VibrationVIEW Help 119
© 1995-2005 Vibration Research Corporation. All rights reserved.
Use this command to force a refresh of the active graph.
Shortcuts
Keys: F5
3.6.10 Pause Graph Updates
Pause Graph Updates ( Graph menu )
Use this command to manually pause or resume the automatic graph refreshes. This is most useful in
Field Data Replicator mode because it allows the operator to closely examine the demand and control
waveforms.
Shortcuts
Keys: Ctrl+P
3.6.11 Reset Graph Data
Reset Graph Data command ( Graph menu )
Use this command to reset the peak- and valley-hold data for a Sine graph to the demand levels. The
data is cleared automatically when a sine test is started. Also, depending on the test settings, the hi/lo
data can be cleared automatically after auto-saving data. (See the
Sine Data Storage settings.)
Use this command to clear the retained time history data for Random and Field Data Replicator time
history graphs.
3.7 Cursor menu
3.7.1 Cursor Window
Cursor Window command ( Cursor menu , View Menu )
Use this command to show or hide the Cursor Display box that shows the values for the graph
traces at the current cursor position.
Holding down the <Shift> key while moving the cursor with the mouse snaps the cursor to the nearest
peak.
Holding down the <Ctrl> key while moving the cursor with the mouse snaps the cursor to the nearest
valley.
Shortcuts
Keys: Ctrl+D
3.7.2 Set Base Cursor
Set Base Cursor command ( Cursor menu )
Use this command to lock the dual cursor at the current cursor position. The primary cursor then
moves freely with the mouse.
Holding down the <Shift> key while moving the cursor with the mouse snaps the cursor to the nearest
peak.
Holding down the <Ctrl> key while moving the cursor with the mouse snaps the cursor to the nearest
valley.
142
277