VIBIA Palo Alto Assembly Instructions Download Page 1

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1.

 

2.

 

4536.

 Net Weight / Peso Neto / Netto-Gewicht   40,3 Kg

4 x LED STRIP 24V 10W                        

       50 Hz

4535.

 Net Weight / Peso Neto / Netto-Gewicht   32,7 Kg

3 x LED STRIP 24V 10W                        

       50 Hz

Class I. Product with an additional protection cable (grounds).
Clase I. Aparato con un cable protector adicional (toma de tierra).
Klasse I. Apparat mit zusätzlichen Schutzleiter (Erdkabel).
Dust-tight product.  Protected against water trickles.
Producto totalmente estanco al polvo. Protegido contra los chorros de 
agua.
Staubdicht. Schutz gegen das Eindringen von Strahlwasser.
Product that CAN be in contact with normally-flammable materials (wood or 
others). 
Está permitido que el producto marcado con este simbolo esté en contacto 
con materiales normalmente inflamables (maderas u otros).
Es ist erlaubt Produkte mit diesem Etikett auf normal entflammbaren 
Oberflächen (Holz usw.) zu montieren.
Alternating current
Corriente alterna
Wechselstrom

Palo Alto

Design by Xuclà

ASSEMBLY INSTRUCTIONS
INSTRUCCIONES DE MONTAJE
MONTAGEANELITUNG

      SUPPLIED MATERIAL                             MATERIAL SUMINISTRADO                      GELIEFERTES MATERIAL 

      TECHNICAL SPECIFICATIONS                 ESPECIFICACIONES TÉCNICAS                     TECHNISCHE DATEN         

4535.

 

 

4536.

 

4535.

 

 

4536.

 

Before assembling and installing this product, carefully 
read the following:

Antes de proceder al montaje e instalación de esta 
luminaria, leer detenidamente las siguientes 
consideraciones.

Bevor Sie mit der Montage dieser Leuchte beginnen, 
sollten Sie die folgenden Hinweise in aller Ruhe lesen und 
berücksichtigen.

-Switch of the mains before installing the lamp.

-Desconectar el suministro eléctrico antes de proceder a la 
instalación de la luminaria.

- Schalten Sie vor dem elektrischen Anschluss den Strom ab.

-If you wish to fix the lamp to the ground, choose the most 
adequate plugs and screws depending on the surface.

-Si se desea fijar la luminaria al suelo elegir los elementos de 
fijación mas adecuados en función del soporte de instalación.

-Sollten Sie die Leuchte fix auf dem Boden befestigen wollen, 
wählen Sie für die vorgesehene Vorrichtung das dafür 
geeigneste Begestigungsmaterial. 

-Before the installation, make sure the installation surface will 
not be damaged. If this happens, it will be the installator´s 
responsibility.

-Asegurarse antes de realizar esta operación que no se 
producirán daños irreparables en el soporte de instalación. En 
caso contrario la responsabilidad será del instalador.

-Vergewissern Sie sich vor diesem Prozess, dass die 
Vorrichtung hierduch nicht dauerhaft beschädigt wird. Im 
entgegengesetzten Falle wäre der Installateur hierfür 
verantwortlich.

-If the steel cable or the power cord of this lamp is damaged, it 
must be replaced only by the manufacturer or their technical 
service or by a person capacitated to this effect to avoid any 
risk.

-Si el cable flexible o cordón de esta luminaria está dañado, 
deberá sustituirse exclusivamente por el fabricante o su 
servicio técnico, o por una persona con cualificación 
equivalente con objeto de evitar cualquier riesgo

- Wenn das Kabel dieser Leuchte beschädigt werden sollte, 
muss es ausgetauscht werden. Dies darf ausschliesslich nur 
durch den Fabrikanten, seinem Kundendienst oder einer 
hierfür qualifizierten Person geschehen, um jegliche Gefahr 
ausschliessen zu können.

-We recommend reading the manual before installaing the 
lamp. Keep this instructions for future reference.

-Recomendamos leer el manual antes de iniciar la instalación 
de la luminaria.  Guardar estas instrucciones para futuras 
consultas.

-Wir empfehlen vor Montagebeginn die Anleitung zu lesen. 
Bewahren Sie die Anleitung für etwaige zukünftige Fragen auf.

-At least two people are needed to install and desinstall the 
lamp.

-Para el montaje y desmontaje de esta luminaría se 
recomienda la participación de un mínimo de dos personas.

-Für Montage und Demontage dieser Leuchte wird die 
Beteiligung von  mindestens 2 Personen empfohlen.

Caution   /   Precaución   /   Vorsicht   

EN

D

ES

4535

4536

1   

Lamp structure /  Estructura luminaria /  Leuchten-Struktur

1 un.

1 un.

2   

Profiles set /  Conjunto perfiles /  Profile-Verbund

3 un.

4 un.

Summary of Contents for Palo Alto

Page 1: ...die Leuchte fix auf dem Boden befestigen wollen wählen Sie für die vorgesehene Vorrichtung das dafür geeigneste Begestigungsmaterial Before the installation make sure the installation surface will not be damaged If this happens it will be the installator s responsibility Asegurarse antes de realizar esta operación que no se producirán daños irreparables en el soporte de instalación En caso contrar...

Page 2: ...tá fijado 4 Pasar el cable de su instalación por el centro de la base hasta que salga por el hueco de la estructura de la luminaria 5 Fijar la base al suelo utilizando los tornillos y tacos más adecuados no suministrados Asegurarse que el tramo de cable de su instalación sea lo suficientemente largo para realizar la conexión eléctrica 1 Zum Lösen der Platten B die Schrauben A entfernen 2 Montieren...

Page 3: ...RTANTE El modelo va preparado para ser conectado a una toma de corriente cumpliendo un IP 66 El cable utilizado debe ser de goma o superior tipo H05 RN F de entre 5 y 10 mm de diámetro Cuarto Después de introducir la regleta roscar el tapón con la tuerca a continuación para garantizar la estanqueidad apretar fuertemente las tuercas inferior F y superior G 7 Acomodar los cables en el interior y eng...

Page 4: ...number and screw each connector tight 11 After this tuck the connectors inside the angle fitting and push the profiles J onto the correct angle fitting K as far as they will go 12 Put in the screws L which were removed previously A A B I 9 10 12 D ES EN 9 Montar las placas B asegurándolas con los tornillos A 10 Para montar los perfiles primero hay que hacer la conexión eléctrica entre ellos median...

Reviews: