Chapter 3
Administration
Remote Administration of the Xgig1000 System via USB
Page 114
Xgig1000 Hardware Guide
March 2017
Client Authentication
To enable or disable client authentication:
From the Main dialog box, select the menu item
Security/Client Authentication.
A dialog box will open and show the current status:
Click the button for the state you require, then enter the password and confirm the pass-
word if you have selected
Enabled.
Then, click the
Save
button to send the new configuration to the chassis. You will receive
a pop up dialog box informing you that a reboot is required for the state to become active.
Web Reset
To reset the WEB login to factory default values:
From the Main dialog box select the menu item
Security/WEB Reset
.
