Chapter 2
Xgig1000 System Setup
Xgig1000 Chassis Shutdown Sequence
Page 100
Xgig1000 Hardware Guide
March 2017
3
Wait until the chassis shuts down completely before removing power. When the unit
has completely shutdown, the behavior of the LEDs varies based on the generation
of the chassis (see the note above.)
Shutdown Using Xgig Application
1
Right-click the chassis in the Port Discovery window.
2
Select “Shutdown Sync Group”.
3
Wait until the chassis shuts down completely before removing power. When the unit
has completely shutdown, the behavior of the LEDs varies based on the generation
of the chassis (see the note above.)
NOTE
The remote administrator also allows you to shut down the chassis. Refer to
