Viavi Xgig, User Manual

Page: 247 / 468

TraceView Configuration Chapter 13, Configuring Xgig TraceView
Xgig Analyzer User’s Guide 233
Figure 103: Port Selection Menu
Some examples of port selection are shown in Figure 104.
Figure 104: Port Selection Menu Examples
For multiplexed ports, ports can be selected by single physical port, single logical link, or single
side of a logical link. Remember that if a single physical port is selected (for example,
SAS Port
(1,2,1) - 0
and
SAS Port (1,2,1) - 1
) you will see the trace information for one-half the traffic of
two different logical links. Some examples of port selection for multiplexed ports are shown in
Figure 105.
Select All Ports
Select Ports by
User-Defined Group
Select Ports By Link
(SAS/SATA only)
Select Ports By Type
Select Muxed Ports in
Select Single Port
Select Logical Link
Port Grouping
Single Physical Port
(SAS/SATA only)
(FC, GE, SAS/SATA, Expert)
Select User-Defined Port Group Select All Ports
Select Ports By Type