Viavi T-BERD MTS 5800, Getting Started Manual, Page: 255 / 296

Appendix A Specifications
Jitter and Wander specifications
T-BERD/MTS/SC Getting Started Guide
March 2018 22046537, Rev. 016 Page 231
Optical jitter and wander specifications
This section provides jitter and wander specifications for the MSAM:
• “Standards” on page 232
• “Jitter generator” on page 232
• “Jitter analyzer” on page 232
• “Automatic jitter measurements” on page 236
• “Wander generator” on page 236
• “Wander measurement” on page 237
• “Memory requirements” on page 239
Synchronization See the Reference Clock Requirements published
in the testing guide that shipped with your unit.
Receiver specifications
Wavelength range 1260 to 1360 nm
1430 to 1580 nm
Rx offset acceptance +100 ppm
Sensitivity 622/2488/2666 Mbps
– -8 to -28 dBm
155 Mbps
– -8 to -34 dBm
Maximum input power
(destructive) +0 dBm
Fiber mode compatibility OC3/OC12 connector
– multimode fiber
– singlemode fiber
OC48/OTU1 connector
– singlemode fiber
Optical level measurement 622/2488/2666 Mbps
– -8 to -28 dBm
155 Mbps
– -8 to -34 dBm
Level measurement accuracy +3 dB
Level measurement resolu-
tion 0.1 dB
1. Remove the connector to clean the optical fiber.
Table 152 Optical interface specifications (Jitter and Wander applications) (Continued)
Item Description