manualshive.com logo in svg

Viavi T-BERD MTS 5800, Getting Started Manual, Page: 148 / 296

Share
Download
Viavi T-BERD MTS 5800 Getting Started Manual Download Page 148

Chapter 4  

Basic Testing

Step 5: Viewing test results

T-BERD/MTS/SC Getting Started Guide

Page 124

22046537, Rev. 016

March 2018

The associated Graph appears.

2

To scroll through the display, use the arrow keys at the top of the pane.

The graph is displayed. You can optionally save the data by selecting the Save Plot 
Data icon at the top of the graph. 

Clearing History results

To clear history results

•

Select Tools > 

Clear History

.

Historical LED results are cleared.

Creating and maintaining Custom result groups 

For each available test application on your unit, you can create Custom result groups 
with results from a variety of categories. This allows you to quickly view certain results 
on a single result pane without navigating through each individual category. You can 
add up to 50 results to each Custom group.

Figure 71

Graph display (Ethernet application)

Summary of Contents for T-BERD MTS 5800









































































































































































































































































































Reviews:

No comments