VIAVI Solutions
Launch Test:
Figure 5: Home View
Figure 6: File Explorer
1.
Press the
ON/OFF
button to turn on the test set.
2.
If files are to be saved, press the
FILE
Button and tap the
results
folder. Otherwise, proceed
to step 4.
3.
Tap the
Create Directory
soft key, enter a name for your new folder, and tap the
Enter
key.
All trace files will be saved to this directory.
4.
Press the
HOME
button to display the Home Screen.
5.
Tap the desired (Multimode or Single Mode)
FTTA OTDR
icon until it is selected and
highlighted yellow.
6.
Press the
SETUP
button. If an
FTTA_RRU_Maintenance
configuration file has already been
loaded, proceed to step 9.
7.
Tap the
Load Config
soft key. Select
FTTA_RRU_Maintenance.SM-OTDR
for single mode
fiber, or
FTTA_RRU_Maintenance.MM-OTDR
for multimode fiber.
8.
Tap the
Load as FTTA Config
soft key.
9.
Tap the
Analysis
soft key:
•
Set
BBU Jumper
to
Yes
if there is a BBU Jumper Cable between the Launch Cable and OPP;
Set
BBU Jumper
to
No
if the Launch Cable is directly connected to the OPP.
•
Set
RRU Jumper
to
Yes
if there is a Junction Box/OPP at the top of the tower between the
Trunk Cable and RRU; Set
RRU Jumper
to
No
if there is no Junction Box or no RRU Jumper.
•
Leave other settings at default values.
•
Tap the
Analysis
title bar to display the
Link
soft key.
10.
Tap the
Link
soft key:
•
Set Base
Station ID
to the Base Station or BBU Identifier.
•
Set RRU
ID
to the RRU Identifier or sector (Alpha, Beta, Gamma).
•
Set
Fiber Code
to the fiber number and polarity using the right (
<
) and left (
>
) arrow
buttons.
•
Set
Change Fiber Nbr
to
Increment.
•
Set
Distance Unit
to
Feet
or
Meters.