Viavi T-BERD 6000A V2, User Manual

Page: 57 / 188

Chapter 6 Scope
Configuring the P5000i Scope
User Manual 76100000200 Rev. 001 37
Configuring the P5000i Scope
Scope
connection
1 Plug in your Viavi scope into a USB port from the 6000A V2 Plat-
form.
2 Push the button
S
YSTEM
3 Validate the Scope function .
4 Connect probe with the fiber being inspected.
You may select this option while others are selected (e.g. OTDR).
Configuring the
Scope
1 Press S
ETUP
key to configure the test.
The following screen displays:
Test Profile
On the line Profile , select the Profile which will be used for the test of
fiber connector:
– SM_UPC: Pass/Fail criteria for single-mode UPC connectors from
IEC 61300-3-35 standard.
– SM_APC: Pass/Fail criteria for single-mode APC connectors from
IEC 61300-3-35 standard.
– SM_PC: Pass/Fail criteria for single-mode PC connectors from IEC
61300-3-35 standard.
– MM_: Pass/Fail criteria for multimode connectors from IEC 61300-3-
35 standard.
Profiles contain the analysis parameters by which Pass/Fail criteria are
determined.
Fig. 15 P5000i Scope Setup