Chapter 16
Maintenance and Troubleshooting
Maintenance procedure
142
User Manual
76100000200 Rev. 001
Cleaning the
optical
connections of the
6000A V2 Platform
–
Squirt a highly volatile solvent (such as isopropylic alcohol) into the
connector.
–
Blow out the connector using a clean dry air supply from an aerosol
can fitted with an extension.
Accessing to
the 6000A V2
Platform
information
On the 6000A V2 Platform, some screens allows to display information
on different elements of the equipment.
To display the information on the 6000A V2 Platform
1
On the
Home
page, press
About
to display the presentation screen
of the 6000A V2 Platform.
General page
The
General
page is displayed by default, and displays the presentation
screen, with all the information concerning the software versions, the
hardware options and the module installed.
This page shows:
–
The software version information
–
The product contents: base, optical options, battery type, module
installed and date of calibration for options concerned.
The options set into the 6000A V2 Platform are marked with a green
tick.
NOTE
If your module has a universal connector, unscrew its adaptor to
access the ferule.
Fig. 90
General page
Summary of Contents for T-BERD 6000A V2
