Chapter 2
Getting Started
Navigating the TEM Module user interface
T-BERD/MTS 5800 Timing Expansion Module User Manual
Page 16
22112315, Rev. 004
July 2017
provided to and by the module.
shows the Timing Module tab when the module
is configured to use a GNSS synchronization source.
For a detailed description of the UI elements on the 5800v2 user interface, refer to the
Getting Started Guide
that shipped with your instrument. The sections below provide
an overview of UI elements that are specifically applicable to the TEM Module.
Timing Module tab
When the TEM Module is connected to your instrument, a Timing Module tab appears
on the Main screen (in addition to the tab or tabs for any tests that you have selected).
The UI elements on the Timing Module tab function in a similar manner to those on the
test tabs; however, the Timing Module tab can not be removed. It will be available when-
ever the module is connected to your instrument and your instrument is powered on.
Figure 4
Main screen (Timing Module, GNSS Synchronization Source)
NOTE:
To review LEDs and results for a specific test, select the corresponding test
tab. If you are running two tests concurrently, pressing the Dual Test View
soft key will display results for both tests in the two result panes, or you can
view Timing results in one pane, and results for one test in the second pane.