Viavi SmartOTDR 100, User Manual, Page: 58 / 156

Chapter 6 Scope
Configuring the P5000i Scope
40 User Manual 7SMART102 Rev002
– Ribbon, SM_APC: Pass/Fail criteria for ribbon singlemode APC
connectors
Profiles contain the analysis parameters by which PASS/FAIL criteria are
determined.
Once the line is selected, you can also add a new profile, clicking on the
Add Button (see “Adding a new profile” on page 42 ).
Tip
On the line Tip, select the tip set onto the scope to connect fiber for
inspection.
Capture button
This parameter allows to select the action of the Quick Capture button
onto the Scope (see
Figure 19 on page 38 ):
Freeze & Test pressing the button will automatically perform a
test of fiber and freeze the result
Freeze image pressing the button onto the Scope will
automatically freeze the live image.
Auto Center
This parameter allows to select if the scope image must be centered on
screen (select
Yes ) or not (select No ).
Advanced focus
This parameter allows to define if the advanced focus must be used
(
Yes ) or not ( No ).
Link
In the Setup page, press Link softkey (if one parameter is selected in the
current screen, press Top Menu soft key to display the right menu keys
and click on Link ).
The information entered in the Link window concerns the editing and/or
the modifications of the cable and fiber parameters.
Fiber Id Use the edition keypad, which will display by
clicking on the right arrow key, to enter a specific
name for the fiber.
Fiber Number Use the numeric keypad, which will display by
clicking on the right arrow key, to enter the fiber
number.
Change fiber Nbr Select if the fiber number must be modified after
each results saving:
No : the fiber number is not modified at each saving