Viavi SmartOTDR 100, User Manual, Page: 98 / 156

Chapter 7 Connectivity
Remote Control
80 User Manual 7SMART102 Rev002
VNC
The SmartOTDR can be used in combination with a PC in order to
transfer the Platform Interface onto a PC, or to access the internal
memory or USB memory stick contents on the PC.
The transfer of the interface can be done using a VNC window on PC.
Transferring the
interface on a PC
via WIFI
Once the IP address is displayed in the configuration screen.
1 On the PC connected to WIFI with the Platform, open Internet
Explorer.
2 Considering
10.33.16.229
is the IP Address of the SmartOTDR (as
shown Figure 38 on page 60 ), enter the following address in the
Internet Explorer window:
http://10.33.16.229:5800
3 Press Enter to validate.
The screen of the SmartOTDR appears offset on your PC.
Fig. 60 File Explorer with cloud storage
Edition
menu
The cloud storage is automatically disconnected once the
SmartOTDR is switched off. Reconnect from the System Settings
page of the SmartOTDR after the Platform restart.
For an intensive use of the deport screen or when it is used via a
WAN network, it is strongly recommended to use a dedicated
VNC client. The VNC clients recommended are Tight VNC (V 1.2.9
or later) and Real VNC (V 4.1.1 or later).