Viavi SmartOTDR 100, User Manual, Page: 80 / 156

Chapter 7 Connectivity
Establishing connection
62 User Manual 7SMART102 Rev002
The password to access VNC can be modified:
1 Click on the menu key Change password .
2 Enter the current password in the Edition keypad and press Enter to
validate.
3 Enter the new password and press Enter to validate.
Ethernet > Mode
Parameters of the local Ethernet network to which the SmartOTDR is
connected:
Config 1 to 4 static mode enabling input of the configuration of
4 sites. If this parameter is selected, the following
parameters must be entered:
– Site Name the user can enter the name of the site in the Edit
menu.
– IP Address IP address of the SmartOTDR
– IP Mask address of the mask of the sub-network
– IP Gateway IP address of the machine enabling access
outside the sub-network.
– DNS
1
IP address of the machine providing the IP
address on the basis of the name
– Domain name name of the local network to which the Smar-
tOTDR is connected.
Dynamic in this mode, which requires a DHCP server, the
SmartOTDR requests an IP address from this
server which will be allocated dynamically if
dynamic host configuration is activated on the
local network.
After selecting this mode or after power-on, the
SmartOTDR tries to establish a connection to
obtain an address from a DHCP server. If for any
reason, this process fails, the SmartOTDR
reverses to static IP address mode with User1 IP
address.
1.Domain Name Server
NOTE
Once the SmartOTDR is connected to the network, the icon
indicates the connection is working.