Viavi SmartOTDR 100, User Manual, Page: 77 / 156

Chapter 7 Connectivity
Establishing connection
User Manual 7SMART102 Rev002 59
11 In the AutoConnect parameter, select if the connection to SSID
selected must be done automatically ( On ) or not ( Off ).
Connection to
SSID
Once configuration is valid, connect the SmartOTDR to the Wireless
network:
1 In the Setup screen, press Connect SSID menu key.
or
If
AutoConnect is defined to On , the connection is launched auto-
matically.
Once association of Platform with SSID is established, the icon
becomes to indicate the connection is active.
Configuring the
WIFI mode to
which the Platform
is connected
To work on WIFI with the Platform, configure the 802.11 parameter on
the WIFI Setup screen.
1 Select the mode of connection:
Config 1 to 4 static mode enabling input of the configuration of
4 sites. If this parameter is selected, the following
parameters must be entered:
– Site Name the user can enter the name of the site in the Edit
menu.
– IP Address IP address of the SmartOTDR
– IP Mask address of the mask of the sub-network
– IP Gateway IP address of the machine enabling access
outside the sub-network.
– DNS (Domain Name Server) IP address of the
machine providing the IP address on the basis of
the name
– Domain name name of the local network to which the Smar-
tOTDR is connected.
Dynamic in this mode, which requires a DHCP server, the
SmartOTDR requests an IP address from this
server which will be allocated dynamically if
dynamic host configuration is activated on the
local network.
After selecting this mode or after power-on, the
SmartOTDR tries to establish a connection to
NOTE
Login and Password are kept in memory, even if the WIFI is deacti-
vated or the SmartOTDR switch off and restarted.