Viavi SmartOTDR 100, User Manual, Page: 64 / 156

Chapter 6 Scope
Launching a test of the connector and fiber end-face
46 User Manual 7SMART102 Rev002
Mosaic Mode
It is possible to display only one picture in full screen (640 * 390 pixels)
or up to four pictures (320*180 pixels each, including the live camera
picture) in mosaic mode. Use the key
Full scr./Mosaic to switch from
one mode to another.
– You may select one of the pictures by clicking on it.
The selected picture is framed in green.
The tool bar on the right varies according to which picture is selected
(camera, or static picture):
Picture selected: Camera
Test Allows to launch a (new) test of the connector
(see
“Launching a test of the connector and
fiber end-face” on page 44 )
Freeze The live picture from the camera is frozen but
does not replace the live picture at position 1.
The new snapshot is placed at the second
position, and all existing pictures are pushed to
the next position.
Fig. 25 Mosaic mode
Position 1 :
L
IVE CAMERA
Position 2:
File saved on disk
Selected picture
If all positions were taken, the picture that was once at the fourth posi-
tion is unloaded from memory. Frozen pictures and snapshots are
lost, unless they were saved on the internal memory.