Viavi SmartOTDR 100, User Manual, Page: 57 / 156

Chapter 6 Scope
Configuring the P5000i Scope
User Manual 7SMART102 Rev002 39
Configuring the P5000i Scope
Scope
connection
1 Plug in your Viavi scope into a USB port from the SmartOTDR.
2 Push the button Home
3 Validate the Scope function .
4 Connect probe with the fiber being inspected.
You may select this option while other options are already selected (e.g.
OTDR).
Configuring the
Scope
1 Press S
ETUP
key to configure the test.
The following screen displays:
Analysis Profile
On the line Profile , select the Profile which will be used for the test of
fiber connector:
– SM_UPC: Pass/Fail criteria for single-mode UPC connectors from
IEC 61300-3-35 standard.
– SM_APC: Pass/Fail criteria for singlemode APC connectors from
IEC 61300-3-35 standard.
– SM_PC: Pass/Fail criteria for singlemode PC connectors from IEC
61300-3-35 standard.
– MM_: Pass/Fail criteria for multimode connectors from IEC 61300-3-
35 standard.
Fig. 20 P5000i Scope Setup