Viavi SmartOTDR 100, User Manual, Page: 56 / 156

Chapter 6 Scope
Scope feature
38 User Manual 7SMART102 Rev002
Scope feature
Overview
This feature enables you to verify that your optical connectors are in
perfect shape and very clean condition.
The P5000i Digital Probe Microscope is a portable handheld microscope
used to view and inspect both the bulkhead (female) and patch cord
(male) sides of fiber connectors as well as other optical devices, such as
transceivers.
The P5000i requires an FBPT inspection tip and is connected to the
SmartOTDR with a USB 2.0 connector.
Installation of tips
The Pass/Fail analysis function on the SmartOTDR can only be used
with certain inspection tips mounted on the P5000i.
Seven tips, patchcords and bulkheads types, are delivered with the
Videoscope Kit (EDFSCOPE5KI) but many others can be used.
Fig. 19 P5000i Probe components
Quickcapture
TM
button
Instantly captures (and analyzes) fiber image
Focus Control
Latch lock
Squeeze both ends to release
Barrel assembly
USB 2.0
connector
6 FT COIL Cable
Inspection tip
Magnification Control
Before using the P5000/P5000i scope, make sure the Bluetooth
option has not been activated, even once, after the start of the
SmartOTDR. If it has been activated, stop and restart the
equipment before using the P5000/P5000i Scope.