Viavi SmartOTDR 100, User Manual, Page: 34 / 156

Chapter 3 Starting up
Choosing the position of the instrument on the work surface
16 User Manual 7SMART102 Rev002
Choosing the position of the instrument on the work surface
Depending on the conditions of use of the Platform 8000, the instrument
may be placed on a flat surface or held in the hand.
When used on a work surface, the SmartOTDR should be supported on
its stay, which can be set in either of two positions, depending on whether
the user is standing or sitting.
To change the stay from “seated user” position to “standing user” posi-
tion, pull the stand outside of its housing until the stop.
Push the stand to return to «seated user» position.
First start: configuring your regional settings
Once the SmartOTDR is switched on, the first screen displayed allows to
configure the regional settings.
Those settings will be kept in memory and automatically applied on the
instrument each time it is restarted.
Fig. 7 SmartOTDR «seated» and «standing» user
positions
Stand
Pull to lift
the stand